Restore your building's exterior with a drone-powered pressure-washing system that cleans brick, stone, glass, and metal facades from the ground — safer, faster, and up to 40–60% lower in example cost than scaffolding or swing-stage methods.
A building's facade is the first thing tenants, guests, and buyers see — and the hardest surface to keep clean. Years of rain, pollution, algae, efflorescence, bird soiling, and urban grime dull the exterior and can shorten the life of the materials underneath. Traditional cleaning means scaffolding, boom lifts, or swing stages: expensive to mobilize, slow to permit, and risky for crews working at height.
Drone facade cleaning replaces that setup. Our team mounts a controlled pressure-washing system on an industrial cleaning drone and operates it from ground level, reaching facade surfaces up to roughly 150 feet. That means we can wash multi-story elevations — including tight, ornate, or hard-to-access areas — without erecting a single frame.
We review every job by building material and tune the water pressure and cleaning solution to the surface, protecting the finish while removing buildup safely and evenly.
We assess the building height, facade material, level of soiling, and access, then confirm the plan and a transparent quote — no obligation.
An FAA Part 107 certified pilot and one ground-crew member arrive and are ready to clean within hours — no scaffolding, permits, or road closures.
The drone applies a controlled, material-matched pressure wash across each elevation, cleaning 300+ square feet per minute with consistent, planned passes.
We review results with you and can capture aerial before/after imagery so you have a documented record of the finished facade.
The same clean facade — without the cost, delay, and risk of scaffolding and lifts.
| Factor | Drone Facade Cleaning | Scaffolding / Lift Methods |
|---|---|---|
| Cost | 40–60% lower total example cost — no access equipment or permits | High: scaffolding rental, permits, and a large crew |
| Speed | 50–70% faster; ready to clean within hours | Days to erect and dismantle before work begins |
| Safety | Ground-level operation — zero workers at height | Crews exposed to fall risk on elevated equipment |
| Disruption | No sidewalk sheds or blocked entrances; minimal tenant impact | Scaffolding, closures, and extended on-site presence |
| Crew size | 2-person crew | 4–8 person crew |
Drone facade cleaning fits a wide range of commercial and multifamily properties across the region.
Keep Class A and Class B office exteriors presentable for tenants and prospects in Newark, Jersey City, and Manhattan without disrupting the workday.
Refresh multifamily facades in Hoboken, Brooklyn, and Center City Philadelphia while keeping residents in place and entrances open.
Restore curb appeal on hotel exteriors quickly and quietly, with minimal impact on guests, valet, and arrivals.
Clean upper facades above active storefronts without closing sidewalks or blocking retail access.
Schools, hospitals, and public buildings benefit from ground-based cleaning that avoids scaffolding around busy campuses.
Gentle, material-matched cleaning for brick and stone facades where finish preservation matters most.
We broke down a real 10-story New Jersey building — equipment, crew size, timeline, and total project cost — and compared it against a traditional scaffolding approach. The drone method came in dramatically lower on cost and faster on schedule, using a Lucid Bots Sherpa and a two-person crew.
Read the NJ Cost Case Study →Serving commercial and multifamily buildings throughout the tri-state area.
Newark, Jersey City, Hoboken, Edison, New Brunswick, Princeton, Morristown, North Bergen, and nearby NJ markets.
Manhattan, Brooklyn, Queens, the Bronx, Staten Island, and surrounding NYC commercial areas.
Philadelphia and nearby commercial areas for facade washing and exterior building cleaning.
Larger commercial, multifamily, hotel, and campus facades — contact us to confirm project fit.
A cleaning drone carries a pressure-washing system operated from the ground by an FAA Part 107 certified pilot, reaching facade surfaces up to roughly 150 feet — so most buildings are cleaned with no scaffolding, lifts, or workers at height.
Brick, stone, precast and cast-in-place concrete, EIFS/stucco, glass curtain walls, aluminum composite panels, and metal cladding. We match the pressure and solution to the material to protect the finish.
In our published NJ cost analysis, drone facade cleaning ran about 40–60% lower in total example cost than a scaffolding-based approach, mainly by removing access equipment, permits, and a large crew.
Minimal disruption. Work happens from ground level with no scaffolding to erect, so there are no sidewalk sheds, blocked entrances, or extended tenant impact.
Send us your building location, facade material, and approximate height — we'll follow up within one business day.
